Blog

Guide: Z Probe Adjustment

Guide: Z Probe Adjustment In this guide we will go over the steps needed to attach or adjust the Z-Probe on the Odin MK1M 3d printer. Note: Although this guide is intended to be used for the MK1M model, the steps are similar for other Odin models as well as […]

Guide: Your First Print

Guide: Your First Print This will guide you through starting your first print. We will complete the following: Preheat Extruder Load Filament Start Print Note: All test files provided for you are sliced for PLA Step 1: Preheat Extruder Before we begin remember to be cautious while working with the […]